Ventilxp.com

merci pour cela, je suis parti en vacances. cela explique pourquoi je ne peux pas le faire fonctionner en dessous de 7000 tr/min. Je vais l'utiliser sur un autre build. thanks for that, ive been away on holiday. that explains why i cannot get it to work below 7000rpm. i will use it on another build.

no it isnt doppler that made it ugly. its me!! i drilled it and filled it with lead. that isnt bad casting. its my poor skills. :eek: i was having a laugh saying everything is ugly. especially my wife. a light hearted comment? this is the problem with literal translation. the meanings can get lost. ...

just like me and everything to do with me my bikes and even my wife. ugly i dont care what they look like. i just want them to work. i will try bedding the linings in by running it gently then it it doesnt work i will persevere with this idea i borrowed off jbot on moped army forum tout comme moi et...

got to dash so this is quick. can you not see the two holes filled with lead near the end of the arms? preload at minimum and tried several springs from 1.2mm to 0.5mm wire. going to clean everything and sand down and run for a while. il faut se précipiter donc c'est rapide. ne voyez-vous pas les de...

its a v toothed malossi belt https://www.lamobylette.net/motobecane-mbk/transmission/courroies-et-poulies/306-courroie-malossi-special-belt-mbk-51-motobecane-88-etc.html and i filmed it in action and im sure it doesnt slip. i have no bearing in the er3 drive so i cant move the bike forward without t...

i use brake or carb cleaner whichever is closest. i have sanded the shoes twice

i do have acetone

maybe i need to run it for a while to get the lining worn to make better contact with the bell. i will roughen up the bell and the lining and try and be gentle on the throttle for half a day to see if it improves. maybe my weak springs are too weak? thank you for all the help and advice so far peut-...

atreju (kris) a écrit : ↑ven. 22 oct. 2021 - 19:44 The shoe may not spin into the clutch (without springs), as David told you, check the clearance on your arm or anything else keep stuck?

i just tried it without springs to see what would happen. ive even tried it reversed lol.

your arms are free on the axes? I think that you have a mechanical limit which prevents the good support on the bell. i can move the arms well past the diameter of the bell. there is nothing stopping them moving outwards Je peux déplacer les bras bien au-delà du diamètre de la cloche. il n'y a rien...

its all free i check that every time. there was roughly 3 mm difference in bell diameter and diameter of the arms. i have tried the springs that came with it (the weaker ones that were fitted.) they are 1.15mm ive tried 0.85 wire and 0.5mm wire. no difference. i think it isnt spinning fast enough. n...

my arms now weigh 170 grams each. i just tried it with NO springs at all. and the engagement point is exactly the same and the bell got very hot to touch. do i have to run the friction material in? bed it in or break it in? i dont know if this will translate? something is definitely wrong. mes bras ...

yes i tried it and if anything it was worse? how is that? its a mobylette 50v 1974 but ive fitted an AV10 motor with a parmakit 50mm top end. i am gonna try it with no springs, crazy but im running out of ideas. i think because the pulley/c;utch speed is so slow compared to the crankshaft there simp...

i have fitted some very weak springs 0.5mm wire. am i going too weak? ive drilled x 2 and filled with lead if anything it engages higher? J'ai installé des ressorts très faibles en fil de 0,5 mm. est-ce que je deviens trop faible ? ive foré x 2 et rempli de plomb si quelque chose s'engage plus haut ?

i will try more weight, drill holes and fill them with lead


je vais essayer plus de poids, percer des trous et les remplir de plomb

Salut, je suis au Royaume-Uni et je ne parle pas français. j'utilise Google Traduction. hi i am in the uk and dont speak french. i am using google translate mon engagement er86 est trop élevé à 7750 tr/min. Je veux qu'il soit beaucoup plus bas, disons 5000 ou 6000 tr/min. j'ai un variateur er3. Quel...