ok j'ai lancer dans le terminal cette commande mais cela m'affiche plein de trucs que je ne sais pas décripter
voila ce que cela me marque, c'est hyper long;
[ 0.817386] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.817389] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.852467] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.852470] pci 0000:00:02.0: IO window: 0x5000-0x5fff
[ 0.852475] pci 0000:00:02.0: MEM window: 0xd2300000-0xd23fffff
[ 0.852479] pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.852484] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.852511] pci 0000:00:04.0: IO window: 0x3000-0x4fff
[ 0.852516] pci 0000:00:04.0: MEM window: 0xd1300000-0xd22fffff
[ 0.852520] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff
[ 0.852525] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
[ 0.852527] pci 0000:00:05.0: IO window: disabled
[ 0.852531] pci 0000:00:05.0: MEM window: 0xd1200000-0xd12fffff
[ 0.852535] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.852540] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.852543] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.852547] pci 0000:00:06.0: MEM window: 0xd2500000-0xd25fffff
[ 0.852550] pci 0000:00:06.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 0.852556] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:0a
[ 0.852558] pci 0000:00:0a.0: IO window: disabled
[ 0.852562] pci 0000:00:0a.0: MEM window: 0xd1100000-0xd11fffff
[ 0.852566] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.852570] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
[ 0.852608] pci 0000:00:14.4: IO window: 0x1000-0x1fff
[ 0.852614] pci 0000:00:14.4: MEM window: disabled
[ 0.852619] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.852635] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.852641] pci 0000:00:02.0: setting latency timer to 64
[ 0.852649] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.852653] pci 0000:00:04.0: setting latency timer to 64
[ 0.852662] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.852666] pci 0000:00:05.0: setting latency timer to 64
[ 0.852673] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.852677] pci 0000:00:06.0: setting latency timer to 64
[ 0.852684] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.852688] pci 0000:00:0a.0: setting latency timer to 64
[ 0.852697] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.852700] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.852702] bus: 01 index 0 io port: [0x5000-0x5fff]
[ 0.852705] bus: 01 index 1 mmio: [0xd2300000-0xd23fffff]
[ 0.852707] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
[ 0.852710] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.852712] bus: 02 index 0 io port: [0x3000-0x4fff]
[ 0.852715] bus: 02 index 1 mmio: [0xd1300000-0xd22fffff]
[ 0.852717] bus: 02 index 2 mmio: [0xd0000000-0xd0ffffff]
[ 0.852720] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.852722] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.852724] bus: 08 index 1 mmio: [0xd1200000-0xd12fffff]
[ 0.852726] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.852728] bus: 08 index 3 mmio: [0x0-0x0]
[ 0.852730] bus: 09 index 0 io port: [0x2000-0x2fff]
[ 0.852732] bus: 09 index 1 mmio: [0xd2500000-0xd25fffff]
[ 0.852734] bus: 09 index 2 mmio: [0xd1000000-0xd10fffff]
[ 0.852737] bus: 09 index 3 mmio: [0x0-0x0]
[ 0.852739] bus: 0a index 0 mmio: [0x0-0x0]
[ 0.852741] bus: 0a index 1 mmio: [0xd1100000-0xd11fffff]
[ 0.852743] bus: 0a index 2 mmio: [0x0-0x0]
[ 0.852744] bus: 0a index 3 mmio: [0x0-0x0]
[ 0.852746] bus: 80 index 0 io port: [0x1000-0x1fff]
[ 0.852749] bus: 80 index 1 mmio: [0x0-0x0]
[ 0.852751] bus: 80 index 2 mmio: [0x0-0x0]
[ 0.852753] bus: 80 index 3 io port: [0x00-0xffff]
[ 0.852755] bus: 80 index 4 mmio: [0x000000-0xffffffff]
[ 0.852766] NET: Registered protocol family 2
[ 0.864602] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.864883] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.865533] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.865829] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.865832] TCP reno registered
[ 0.868647] NET: Registered protocol family 1
[ 0.868779] checking if image is initramfs... it is
[ 1.449153] Freeing initrd memory: 7587k freed
[ 1.449221] Simple Boot Flag at 0x44 set to 0x1
[ 1.449467] cpufreq: No nForce2 chipset.
[ 1.449609] audit: initializing netlink socket (disabled)
[ 1.449625] type=2000 audit(1246895043.448:1): initialized
[ 1.457466] highmem bounce pool size: 64 pages
[ 1.457472] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.458872] VFS: Disk quotas dquot_6.5.1
[ 1.458932] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.459607] fuse init (API version 7.10)
[ 1.459690] msgmni has been set to 1671
[ 1.460070] alg: No test for stdrng (krng)
[ 1.460089] io scheduler noop registered
[ 1.460092] io scheduler anticipatory registered
[ 1.460094] io scheduler deadline registered
[ 1.460110] io scheduler cfq registered (default)
[ 1.505672] Clocksource tsc unstable (delta = -98160770 ns)
[ 1.624110] pci 0000:01:00.0: Boot video device
[ 1.624357] _OSC request fails
[ 1.627253] _OSC request fails
[ 1.630606] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.630643] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.630671] pcieport-driver 0000:00:02.0: irq 2302 for MSI/MSI-X
[ 1.630683] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.630703] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.630760] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.630791] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.630813] pcieport-driver 0000:00:04.0: irq 2301 for MSI/MSI-X
[ 1.630824] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.630838] pci_express 0000:00:04.0:pcie02: allocate port service
[ 1.630852] pci_express 0000:00:04.0:pcie03: allocate port service
[ 1.630902] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.630934] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.630956] pcieport-driver 0000:00:05.0: irq 2300 for MSI/MSI-X
[ 1.630967] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.630981] pci_express 0000:00:05.0:pcie03: allocate port service
[ 1.631032] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.631065] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.631087] pcieport-driver 0000:00:06.0: irq 2299 for MSI/MSI-X
[ 1.631098] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.631112] pci_express 0000:00:06.0:pcie03: allocate port service
[ 1.631162] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 1.631193] pcieport-driver 0000:00:0a.0: found MSI capability
[ 1.631215] pcieport-driver 0000:00:0a.0: irq 2298 for MSI/MSI-X
[ 1.631226] pci_express 0000:00:0a.0:pcie00: allocate port service
[ 1.631240] pci_express 0000:00:0a.0:pcie03: allocate port service
[ 1.631302] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.631404] _OSC request fails
[ 1.631447] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.635217] ACPI: AC Adapter [ACAD] (on-line)
[ 1.636609] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.636717] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.636719] ACPI: Power Button (FF) [PWRF]
[ 1.636762] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.636765] ACPI: Power Button (CM) [PWRB]
[ 1.636815] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.636817] ACPI: Sleep Button (CM) [SLPB]
[ 1.636875] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.638864] ACPI: Lid Switch [LID]
[ 1.639349] processor ACPI_CPU:00: registered as cooling_device0
[ 1.639363] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.639463] processor ACPI_CPU:01: registered as cooling_device1
[ 1.646392] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080926]
[ 1.646452] isapnp: Scanning for PnP cards...
[ 2.030713] isapnp: No Plug & Play device found
[ 2.040907] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.042041] brd: module loaded
[ 2.042401] loop: module loaded
[ 2.042478] Fixed MDIO Bus: probed
[ 2.042485] PPP generic driver version 2.4.2
[ 2.042556] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.042589] Driver 'sd' needs updating - please use bus_type methods
[ 2.042599] Driver 'sr' needs updating - please use bus_type methods
[ 2.042637] ahci 0000:00:11.0: version 3.0
[ 2.042697] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.042899] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.042903] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.043850] scsi0 : ahci
[ 2.044081] scsi1 : ahci
[ 2.044223] scsi2 : ahci
[ 2.044363] scsi3 : ahci
[ 2.044509] scsi4 : ahci
[ 2.044649] scsi5 : ahci
[ 2.044734] ata1: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408100 irq 22
[ 2.044738] ata2: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408180 irq 22
[ 2.044742] ata3: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408200 irq 22
[ 2.044746] ata4: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408280 irq 22
[ 2.044750] ata5: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408300 irq 22
[ 2.044754] ata6: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408380 irq 22
[ 2.528063] ata1: softreset failed (device not ready)
[ 2.528116] ata1: failed due to HW bug, retry pmp=0
[ 2.692067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.693495] ata1.00: ATA-8: ST9160310AS, HP07, max UDMA/100
[ 2.693499] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.695244] ata1.00: configured for UDMA/100
[ 3.192057] ata2: softreset failed (device not ready)
[ 3.192104] ata2: failed due to HW bug, retry pmp=0
[ 3.356066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.370337] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0500, max UDMA/100
[ 3.384094] ata2.00: configured for UDMA/100
[ 3.720082] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.056081] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.392081] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.728081] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.744174] scsi 0:0:0:0: Direct-Access ATA ST9160310AS HP07 PQ: 0 ANSI: 5
[ 4.744286] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.744304] sd 0:0:0:0: [sda] Write Protect is off
[ 4.744307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.744333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.744414] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.744427] sd 0:0:0:0: [sda] Write Protect is off
[ 4.744430] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.744452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.744456] sda: sda1 sda2 sda3 sda4 <sda5>
[ 4.830137] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.830198] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.832795] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L 0500 PQ: 0 ANSI: 5
[ 4.845100] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.845104] Uniform CD-ROM driver Revision: 3.20
[ 4.845208] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.845244] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.845606] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.845690] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 4.845817] scsi6 : pata_atiixp
[ 4.845932] scsi7 : pata_atiixp
[ 4.847175] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14
[ 4.847178] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
[ 5.156711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.156768] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.156793] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 5.156797] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 5.156869] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 5.156929] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 5.156954] ehci_hcd 0000:00:12.2: debug port 1
[ 5.156975] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2408500
[ 5.168071] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.168157] usb usb1: configuration #1 chosen from 1 choice
[ 5.168190] hub 1-0:1.0: USB hub found
[ 5.168200] hub 1-0:1.0: 6 ports detected
[ 5.168389] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.168403] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 5.168407] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.168452] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 5.168521] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 5.168541] ehci_hcd 0000:00:13.2: debug port 1
[ 5.168558] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2408400
[ 5.180069] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.180140] usb usb2: configuration #1 chosen from 1 choice
[ 5.180165] hub 2-0:1.0: USB hub found
[ 5.180172] hub 2-0:1.0: 6 ports detected
[ 5.180321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.180374] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.180387] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 5.180391] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 5.180435] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 5.180494] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2407000
[ 5.240080] usb usb3: configuration #1 chosen from 1 choice
[ 5.240103] hub 3-0:1.0: USB hub found
[ 5.240150] hub 3-0:1.0: 3 ports detected
[ 5.240276] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.240289] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 5.240292] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 5.240336] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 5.240387] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2406000
[ 5.296086] usb usb4: configuration #1 chosen from 1 choice
[ 5.296110] hub 4-0:1.0: USB hub found
[ 5.296153] hub 4-0:1.0: 3 ports detected
[ 5.296279] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.296291] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 5.296294] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 5.296347] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 5.296402] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2405000
[ 5.352086] usb usb5: configuration #1 chosen from 1 choice
[ 5.352110] hub 5-0:1.0: USB hub found
[ 5.352159] hub 5-0:1.0: 3 ports detected
[ 5.352294] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.352306] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 5.352309] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 5.352354] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 5.352404] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2404000
[ 5.408080] usb usb6: configuration #1 chosen from 1 choice
[ 5.408103] hub 6-0:1.0: USB hub found
[ 5.408155] hub 6-0:1.0: 3 ports detected
[ 5.408290] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.408385] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.434124] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.434131] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.436606] mice: PS/2 mouse device common for all mice
[ 5.456658] rtc_cmos 00:05: RTC can wake from S4
[ 5.456698] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 5.456733] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 5.456803] device-mapper: uevent: version 1.0.3
[ 5.456972] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
[ 5.457272] device-mapper: multipath: version 1.0.5 loaded
[ 5.457276] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.457471] EISA: Probing bus 0 at eisa.0
[ 5.457519] Cannot allocate resource for EISA slot 1
[ 5.457522] Cannot allocate resource for EISA slot 2
[ 5.457525] Cannot allocate resource for EISA slot 3
[ 5.457528] Cannot allocate resource for EISA slot 4
[ 5.457530] Cannot allocate resource for EISA slot 5
[ 5.457532] Cannot allocate resource for EISA slot 6
[ 5.457543] EISA: Detected 0 cards.
[ 5.457713] cpuidle: using governor ladder
[ 5.457717] cpuidle: using governor menu
[ 5.458230] TCP cubic registered
[ 5.458341] NET: Registered protocol family 10
[ 5.458762] lo: Disabled Privacy Extensions
[ 5.459059] NET: Registered protocol family 17
[ 5.459077] Bluetooth: L2CAP ver 2.11
[ 5.459079] Bluetooth: L2CAP socket layer initialized
[ 5.459083] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.459085] Bluetooth: SCO socket layer initialized
[ 5.459172] Bluetooth: RFCOMM socket layer initialized
[ 5.459181] Bluetooth: RFCOMM TTY layer initialized
[ 5.459183] Bluetooth: RFCOMM ver 1.10
[ 5.459292] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-64 processors (2 cpu cores) (version 2.20.00)
[ 5.459364] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 5.459369] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 5.459864] Using IPI No-Shortcut mode
[ 5.459947] registered taskstats version 1
[ 5.460125] Magic number: 1:730:739
[ 5.460277] rtc_cmos 00:05: setting system clock to 2009-07-06 15:44:08 UTC (1246895048)
[ 5.460280] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.460283] EDD information not available.
[ 5.460735] Freeing unused kernel memory: 532k freed
[ 5.460933] Write protecting the kernel text: 4112k
[ 5.461023] Write protecting the kernel read-only data: 1524k
[ 5.474840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 5.480066] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 5.542604] compcache: Compressed swap size set to: 773820 KB
[ 5.543698] TLSF: pool: f7e10000, init_size=16384, max_size=0, grow_size=16384
[ 5.632115] usb 1-3: configuration #1 chosen from 1 choice
[ 5.685170] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.685194] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.685214] r8169 0000:09:00.0: setting latency timer to 64
[ 5.685310] r8169 0000:09:00.0: irq 2297 for MSI/MSI-X
[ 5.685894] eth0: RTL8168c/8111c at 0xf7c7a000, 00:23:8b:6d:72:0f, XID 3c4000c0 IRQ 2297
[ 5.704595] ohci1394 0000:0a:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.704606] ohci1394 0000:0a:00.0: setting latency timer to 64
[ 5.756598] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[d1100000-d11007ff] Max Packet=[512] IR/IT contexts=[4/4]
[ 5.992732] usb 6-1: new low speed USB device using ohci_hcd and address 2
[ 6.010136] Adding 773816k swap on /dev/ramzswap0. Priority:100 extents:1 across:773816k
[ 6.166243] usb 6-1: configuration #1 chosen from 1 choice
[ 6.176786] usbcore: registered new interface driver hiddev
[ 6.185698] input: MLK Trust Mouse 15315-02 as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input6
[ 6.186203] generic-usb 0003:04FC:05DA.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Trust Mouse 15315-02] on usb-0000:00:13.1-1/input0
[ 6.186225] usbcore: registered new interface driver usbhid
[ 6.186230] usbhid: v2.6:USB HID core driver
[ 6.536838] PM: Starting manual resume from disk
[ 6.536842] PM: Resume from partition 8:3
[ 6.536844] PM: Checking hibernation image.
[ 6.537165] PM: Resume from disk failed.
[ 6.545344] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[ 6.545358] ReiserFS: sda5: using ordered data mode
[ 6.555271] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 6.555889] ReiserFS: sda5: checking transaction log (sda5)
[ 6.587706] ReiserFS: sda5: Using r5 hash to sort names
[ 7.040202] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00784c5601]
[ 11.816420] udev: starting version 141
[ 12.050175] sdhci: Secure Digital Host Controller Interface driver
[ 12.050179] sdhci: Copyright(c) Pierre Ossman
[ 12.082971] sdhci-pci 0000:0a:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 12.082998] sdhci-pci 0000:0a:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.083166] sdhci-pci 0000:0a:00.1: setting latency timer to 64
[ 12.083232] mmc0: SDHCI controller on PCI [0000:0a:00.1] using DMA
[ 12.083241] sdhci-pci 0000:0a:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 12.083257] sdhci-pci 0000:0a:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.083264] sdhci-pci 0000:0a:00.2: Refusing to bind to secondary interface.
[ 12.083272] sdhci-pci 0000:0a:00.2: PCI INT A disabled
[ 12.263567] Linux agpgart interface v0.103
[ 12.351984] lis3lv02d: laptop model unknown, using default axes configuration
[ 12.367537] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 12.373468] lis3lv02d driver loaded.
[ 12.438337] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMBI [0xb00-0xb0f]
[ 12.438341] ACPI: Device needs an ACPI driver
[ 12.438349] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 12.633030] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 12.660633] cfg80211: Calling CRDA to update world regulatory domain
[ 12.778005] cfg80211: World regulatory domain updated:
[ 12.778011] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.778015] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.778018] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.778021] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.778024] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.778026] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.806597] Linux video capture interface: v2.00
[ 12.882712] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 13.622404] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 13.651939] [fglrx] Maximum main memory to use for locked dma buffers: 2876 MBytes.
[ 13.652163] [fglrx] vendor: 1002 device: 95c4 count: 1
[ 13.652481] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 13.652568] pci 0000:01:00.0: power state changed by ACPI to D0
[ 13.652580] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.652587] pci 0000:01:00.0: setting latency timer to 64
[ 13.653030] [fglrx] Driver built-in PAT support is enabled successfully
[ 13.653072] [fglrx] module loaded - fglrx 8.60.40 [Mar 14 2009] with 1 minors
[ 13.701054] acpi device:0c: registered as cooling_device2
[ 13.701376] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input9
[ 13.710921] ACPI: Video Device [DVGA] (multi-head: yes rom: no post: no)
[ 13.861141] leds-hp-disk driver loaded.
[ 13.931126] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)
[ 13.932904] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10
[ 13.933025] usbcore: registered new interface driver uvcvideo
[ 13.933048] USB Video Class driver (v0.1.0)
[ 13.998879] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[ 14.046495] ath5k_pci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.046509] ath5k_pci 0000:08:00.0: setting latency timer to 64
[ 14.046667] ath5k_pci 0000:08:00.0: registered as 'phy0'
[ 14.086781] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 14.089445] phy0: Selected rate control algorithm 'pid'
[ 14.157644] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.157749] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 14.196413] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 14.230237] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 14.230347] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 14.510993] lp: driver loaded but no devices found
[ 14.671855] Adding 3172828k swap on /dev/sda3. Priority:-1 extents:1 across:3172828k
[ 23.028360] kjournald starting. Commit interval 5 seconds
[ 23.028821] EXT3 FS on sda6, internal journal
[ 23.028828] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.595703] type=1505 audit(1246887866.631:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2314
[ 23.653069] type=1505 audit(1246887866.691:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2318
[ 23.653221] type=1505 audit(1246887866.691:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2318
[ 23.653279] type=1505 audit(1246887866.691:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2318
[ 23.653332] type=1505 audit(1246887866.691:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2318
[ 23.807662] type=1505 audit(1246887866.843:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2323
[ 23.807886] type=1505 audit(1246887866.843:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2323
[ 23.840395] type=1505 audit(1246887866.876:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2327
[ 26.286240] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.286244] Bluetooth: BNEP filters: protocol multicast
[ 26.357498] Bridge firewalling registered
[ 27.878983] ppdev: user-space parallel port driver
[ 30.993776] fglrx_pci 0000:01:00.0: irq 2296 for MSI/MSI-X
[ 31.007917] [fglrx] Firegl kernel thread PID: 3325
[ 31.008332] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[ 31.337597] [fglrx] Gart USWC size:1447 M.
[ 31.337601] [fglrx] Gart cacheable size:60 M.
[ 31.337608] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 31.337612] [fglrx] Reserved FB block: Unshared offset:fd03000, size:2fd000
[ 31.337614] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 31.961071] r8169: eth0: link down
[ 31.961291] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.992524] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.717109] ath5k phy0: unsupported jumbo
[ 54.400052] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x021f000a
[ 55.404018] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x021f000a
[ 56.932526] CPU0 attaching NULL sched-domain.
[ 56.932534] CPU1 attaching NULL sched-domain.
[ 56.941873] CPU0 attaching sched-domain:
[ 56.941878] domain 0: span 0-1 level CPU
[ 56.941881] groups: 0 1
[ 56.941889] CPU1 attaching sched-domain:
[ 56.941890] domain 0: span 0-1 level CPU
[ 56.941892] groups: 1 0
[ 60.699442] wlan0: authenticate with AP 00:90:4b:c6:aa:86
[ 60.701683] wlan0: authenticated
[ 60.701687] wlan0: associate with AP 00:90:4b:c6:aa:86
[ 60.703851] wlan0: RX AssocResp from 00:90:4b:c6:aa:86 (capab=0x411 status=0 aid=1)
[ 60.703854] wlan0: associated
[ 60.706071] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 71.424039] wlan0: no IPv6 routers present
bodin@bodin-laptop:~$
